GLORY

Glory CASHINFINITY with ImaCash: configuration

Configure the GLORY FCC service and the ImaCash event channel. Both commands and events must travel between the device and the ImaCash PC.

Before starting, ask the provider to confirm the model, firmware, FCC version, configured currency and private connection and authentication settings. Arrange the work with no cash operations in progress.

1. In Configuration > Machine, select CashInfinity and the exact model: CI-5, CI-10 or CI-50. These are ImaCash selections; they do not by themselves validate every variant or other manufacturer models.
2. In Machine IP, enter the FCC service destination confirmed by the provider. This differs from PC IP, which identifies the ImaCash computer to which the device sends events. The administrator must supply both private addresses.
3. Port is the TCP event receiver port on the ImaCash PC, not the FCC SOAP service port. The provider must confirm that port and that the device can reach PC IP over the network. The administrator must review conflicts and the necessary rules without disabling device protection.
4. Fill in FCC session user and FCC session password with the private credentials specified by the provider when its configuration requires them. These are neither PC IP nor the Windows login. Do not use factory values or another installation’s accounts.
5. Select the device’s actual currency: ImaCash offers EUR and MXN in this configuration, which does not prove that the hardware supports both. Save through the normal workflow and check command and event communication before planning supervised commissioning with the provider.

A connection, picture or model selection does not validate payments, refunds, inventory or physical dispensing. The provider must confirm the exact model, modules and functions available with that FCC version. CI-10 does not automatically mean CI-10X; keep the selection specified for your installation.

View the GLORY CASHINFINITY range